COMPUTERIZED LANES

TWO AND THREE MOVEMENT

HIDRAULIC PLAY DETECTOR FOR HEAVY VEHICLES

TOR III - TOR IV

These equipments are designed to detect possible existing holes located in steering knuckles, leaf springs, power steering system , bearings, etc...

It will help in corrosion and possible defect detection.

Thanks to all its features this play detector is an essential machine in a garage.

This machine consists of two frames and a hydraulic power pack (It can be installed inside an inspection pit or adding an additional desk to install the hydraulic system inside the switchboard outside the inspection pit).

This machine is managed by a lantern (with halogen lamp) used as a remote control with buttons on it. Integrated buttons are used to activate play movements.

TECHNICAL FEATURES:

- Maximum admisible weight 20 tons
- Side movement 55 mm.
- Side force 34.000 Nw. Per movement.
- Circuit working pressure: 140 bar.
- Bench dimensions: 710 x 710 x 220 mm.
- Weight: 250 kg.
- 12 V halogen handlight remote controller.
- 24 V Electric valve activation.

TOR III: 3 independent double movements

Left plate with both cross and longitudinal movements.
Right plate with longitudinal movement.

TOR IV: 2 independent double movements

Left plate with cross movement.
Right plate with longitudinal movement.

ACCESSORIES:

- Out of pit desk with hydraulic unit
- 4th independent or simultaneous movement to adapt TOR III