AUTOMATED SPEEDOMETER-TAXIMETER

FOR LIGHT VEHICLES

TIN I

Introduction:

Machine designed to test vehicle speed, taximeter depending on time and distance and the tachograph depending on speed, time and distance.

BENCH TECHNICAL FEATURES:

- Steel bench made of metal sheet.
- Dimensions: 2.320 x 580 x 280 mm.
- Maximum track: 2.120 mm.
- Minimum track: 850 mm.
- Maximum axle load 3.5 TN.
- Roller diameter: 200 mm.
- Roller length: 735 mm.
- Encoder impulse measuring system.
- Possibility of connecting an electronic board for measuring speedometer-taximeter.

CABINET TECHNICAL FEATURES:

MONITOR

Type: Computer

Resolution: Super VGA

Size: 17" (TFT)
This color monitor will let you watch test results in great definiton images. Besides, it has contrast, brightness, vertical possition, color saturation, horizontal syncronism and tracking controls.
Multiple mirroring screen possibility (On demand offer).

MAIN UNIT
Type: Professional Compuer Processor: Intel Hard Disk: High capacity
Graphic Card: SVGA. Keyboard: W-95 105 keys Memory: last generation memory
This unit is designed by our engineering group, it will let you control all measurements and tests done.

You can also install any other software you need, high capacity and computer performance.
COLOR PRINTER
A4 Printer, Great performance inkjet color printer.

SOFTWARE:

• The software recieves the wheel length value on the roller bench. If the wheel length value is manually entered, the software automatically calculates the correction coefficient that must be used in the test.
  If the wheel length value is not entered, the software has a programmable value for it, it is only used if the coefficient cannot be automatically calculated.
• Possibility of selecting from multiple taxi rates, all programmable
• Possibility of using a remote control for an easier software use.
• Two modes are available:
  - Displaying with digital indicators format..
  - Displaying with table format.
• Displays and stores the following data:
  - Distance
  - Time
  - Speed
  - € per distance
  - € per time
• Each and every of these parameters are displayed in the report next to the theoretical value that is stored with its rate and the error between the theoretical and measured value.
  Absolut or relative errors can also displayed.
• Report printing. It only prints selected variables. The theoretical value, the value measured in the bench and both errors data.
• Customer management. The software stores new customers' data in the database, it also stores test results data and measurements in the database for later recopilation and visualization. This method allowd comparisons between different test data.
• This software is network ready, for plate selection and storing data.